Sony DAV-S400 - Manual (Page 65)

65 GB
Settings and Adjustments
DAV-S400 4-240-074-12(1)
Settings for the Speakers
(SPEAKER SETUP)
To obtain the best possible surround sound,
set the size of the speakers you have
connected and their distance from your
listening position. Then use the test tone to
adjust the volume and the balance of the
speakers to the same level.
Select “SPEAKER SETUP” in the setup
display. For details, see “Using the Setup
Display” (page 61).
The default settings are underlined.
To return to the default setting
Select the item, then press CLEAR.
xSIZE
When you do not connect centre or rear
speakers, or move the rear speakers, set the
parameters for CENTER and REAR. Since
the front speakers and subwoofer settings
are fixed, you cannot change them. The
default settings are underlined.
• FRONT
— YES
• CENTER
— YES: Normally select this.
— NONE: Select this if no centre speaker
is used.
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
OFF TEST TONE:
FRONT:
CENTER:
YES
BEHIND(LOW)
YES
YES
REAR:
SUBWOOFER:
continued
No priority given.
Priority given.
xTRACK SELECTION (DVD only)
Gives the sound track having the highest
number of channels priority when you play
a DVD on which multiple audio formats
(PCM, MPEG audio, DTS, or Dolby Digital
format) are recorded.
OFF
AUTO
Notes
• When you set the item to “AUTO,” the language
may change. The “TRACK SELECTION” setting
has higher priority than the “AUDIO” settings in
“LANGUAGE SETUP” (page 62).
• If PCM, DTS, MPEG audio, and Dolby Digital
sound tracks have the same number of channels, the
system selects PCM, DTS, Dolby Digital, and
MPEG audio sound tracks in this order.
• Depending on the DVD, the audio channel with
priority may be predetermined. In this case, you
cannot give priority to the DTS, Dolby Digital, or
MPEG audio format by selecting “AUTO.”