Sony KP- 57WV600 - Manual (Page 36)

35
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
Notes on Using This Connection
To Do This ... Do This ...
Watch the satellite receiver Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the
illustration).
The VCR may need to be turned on and set to the satellite receiver input.
Watch the VCR Press TV/VIDEO repeatedly to select the input to which the VCR is connected
(VIDEO 1 in the illustration).
Set up the TV remote control
to operate the satellite
receiver or VCR If you have a non-Sony VCR or satellite receiver, you must program the
remote control. See “Programming the Remote Control” on pages 51-52.
Activate the TV remote
control to operate the satellite
receiver or VCR For the satellite receiver, press SAT/CABLE FUNCTION . For the VCR, open the
outside cover, as shown on page 50. Then set the A/V slide switch to the
position you programmed for the VCR.
Control satellite receiver and
VCR functions with the TV
remote control See “Operating a Satellite Receiver” on page 53 and “Operating a VCR” on
page 53.
Label video inputs to easily
identify equipment connected
to the TV See the instructions for setting up Video Labels on pages 83-84.
DA4X.book Page 35 Tuesday, April 23, 2002 2:48 PM