SECO-LARM USA Push-to-Exit Bar SD-961A-36 User Manual
Seco-larm, Push-to-exit bar, New! easier to install
SD-961A-36
Designed to allow egress from inside an area
normally locked by an electric lock or
electromagnetic lock, and/or to disarm (shunt)
or trigger an alarm when the door is opened.
SECO-LARM
®
Push-to-Exit Bar
Features:
Rugged, heavy-duty construction.
Pushing the bar at any point sends a signal to release
the lock and/or sound an alarm.
For 36 inch doors (actual length is 34.5 inches). Can be
cut to size.
Two built-in non-latching (momentary), dual-contact
switches (NO/COM/NC). -- 5 Amps @ 125VAC.
Attractive brushed-aluminum bar with black
base and trim.
Includes SECO-LARM SD-969-A18 Armored
Door Cord, and mounting hardware for
mounting on wood or metal doors.
SECO-LARM
®
U.S.A., Inc.,
16842 Millikan Avenue, Irvine, CA 92606 Tel: 1-800-662-0800 (Domestic U.S. & Canada)
Tel: 1-949-261-2999 (California & International) F W
SD-961A-36
Circuit Type
Contact Rating
Size
Weight
2 Built-in non-latching (momentary)
N.O. or N.C. Contacts
5 Amps @ 125VAC
For 36” doors. Actual size 34.5”
7 lbs. (3kg)
New!
Easier to Install!
New end caps come off and go on in
seconds.
Now includes complete mounting
hardware for hollow doors.
PushBar_New2.pmd
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Copyright
©
2005 SECO-LARM U.S.A., Inc.
DIMENSIONS:
2
3
/
4
”
(70mm)
Total, including end caps:
34
1
/
2
” (876 mm)
Without end caps.
32
1
/
4
” (819 mm)
2
13
/
32
” (61mm)
2” (50mm)
2
19
/
32
”
(66mm)
SPECIFICATIONS: