Set up the printer filter – Samsung ML-1200 Series User Manual
Page 124
A
PPENDIX
GNU Ghostscript software, in directory /linux/gs5.10 and /linux/gs5.50 on this CD is
Copyright (C) 1999 Aladdin Enterprise, Menlo Park, California, and other authors as
indicated in its documentation.
This software is not subject to the End User License Agreement: your rights to this
software are given by the GNU License, which is in a file called COPYING in that
directory.
GNU Ghostscript should be available on all GNU site, such as ftp://ftp.gnu.org/pub/gnu/.
4. Set up the printer filter.
To set up:
1
Run printtool at x terminal.
2
To add the printer driver, click the Add button.
3
In the Add a Printer Entry window, decide the printer
type you will use. Select Local Printer if you have a PC-
connected printer.
4
Click the OK button.
5
If the Info button appears, ignore it, then click the OK
button.
6
The Edit xxxx Entry window opens (where xxxx is the
printer type you have selected at step 3).
If you are not an advanced user, do not change the
Names/Spool Directory/File Limit in Kb/Printer
Device option.
7
Click the Select button in the Input Filter to access
filter setup.
8
Select Samsung Printer PrinThru Compatible for the
Printer Type item. Then select the default resolution and
paper size.
9
To save the setting, press the OK button.
10
In the Edit xxxx Entry window, press the OK button to
complete the printer driver installation.
11
You can find that the printer driver is added to the
driver window. Select Quit from the PrintTool menu.
Linux Driver Installation
A.26