Samsung ML-1200 Series - Manual (Page 39)

P
RINT
M
EDIA
4.5
Loading Paper
The automatic input tray holds 150 sheets of paper and five
sheets of special media. See “Media Sizes and Capacities” on
page
4.2 for acceptable paper size and capacities for each
input tray.
Load a stack of paper into the automatic input tray and print.
For details on loading paper in the automatic input tray, see
“Loading Paper” on page
2.4 .
Note: Before using the automatic input tray, you must remove
the paper from the manual input tray.
Proper paper loading helps prevent paper jams and insures
trouble-free printing. Do not remove paper from the tray(s)
while a job is printing. Doing so may cause a paper jam.
Using the Automatic Input Tray
If you select Manual in the Paper Source option, you can manually load paper in the
manual
input tray . Manually loading paper can be helpful when you want to check the print
quality after each page is printed.
If you experience a paper jam from the automatic input tray, load one sheet of paper at a
time into the manual input tray .
Note: To avoid a paper jam, use the manual tray with the automatic input tray loaded with paper.
Using the Manual Input Tray
1
Load the print media in the manual
input tray with the print side up.
Adjust the paper guide against the
stack of print media without bending
the stack.