Samsung ML-1200 Series - Manual (Page 46)

P
RINT
M
EDIA
4.12
Printing on Preprinted Paper
1
Load letterhead into the input tray
with the design face up, bottom
edge toward the printer.
Adjust the guide to fit the width of the
paper stack.
2
To print on preprinted paper, configure
the paper source, type and size in the
software application. For details, see
page
5.3 .
Guidelines
• Letterhead must be printed with heat-resistant ink that will not melt, vaporize, or release
hazardous emissions when subjected to the printer’s fusing temperature of 400°F
(205°C) for 0.1 second.
• Ink on letterhead must be non-flammable and should not adversely affect any printer
rollers.
• Forms and letterhead should be sealed in moisture-proof wrapping to prevent changes
during storage.
• Before loading preprinted paper as forms and letterhead, verify that the ink on the paper
is dry. During the fusing process, wet ink can come off preprinted paper.