Samsung BP59-00092G-03 - Manual (Page 26)

shaking. If the noise is not removed using Fine Adjustment, adjust the frequency to the
maximum and then perform Fine Adjustment again.
Only activated in the PC environment.
1) Auto Adjustment : Used to adjust frequency and phase of PC screen
automatically.
2) Coarse : Used to adjust frequency when vertical lines appear on PC screen.
3) Fine : Used to fine tune the PC screen.
4) Zoom : Used to extend PC screen from the center.
5) Reset : Using this function, you can reset the PC menu settings to the factory
default settings.
▶ Video Type
If the Component video signal input through the D-SUB input port is not
automatically recognized, you can set the input signal type by force.
※ For the SP-P400 model, this function is unavailable as this model does not
support component input.
Auto
Adjustment
Coarse
Fine
Zoom
Reset
Factory Default Using this function, you can reset various settings to the factory default settings.
| Input | Picture | Setup | Option |
* Click the Play( )/Stop( ) button in the table below to view the video file.
Screen
Adjustment
Description Play/Stop
Language You can select the language used for the menu screen.