Sony EVI-D100 - Manual (Page 22)

22
Command List
• EVI-D100/P Windows D-sub 25 pin
Pin assignment
8 7 6
5 4 3
2 1
IR OUT outputs the signals of the Remote Commander
at 0 to 5 V when the IR OUT switch is set to ON.
When the switch is set to OFF, signals input to the
VISCA IN jack are output through the VISCA OUT
jack.
No Pins Signals
1 DTR DataTransmission Ready (OUTPUT)
2 DSR Data Set Ready (INPUT)
3 TXD Transmit Data (OUTPUT)
4 GND Ground
5 RXD Receive Data (INPUT)
6 GND Ground
7 IR OUT IR Commander Signal (OUTPUT)
8 N.C. No Connection
1. DTR
2. DSR
3. TXD
4. GND
5. RXD
6. GND
7. IR OUT
8. N.C.
1. CD
2. RXD
3. TXD
4. DTR
5. GND
6. DSR
7. RTS
8. CTS
9. RI
• EVI-D100/P EVI or Macintosh
1. DTR
2. DSR
3. TXD
4. GND
5. RXD
6. GND
7. IR OUT
8. N.C.
1. DTR
2. DSR
3. TXD
4. GND
5. RXD
6. GND
7. OPEN
8. OPEN
1. DTR
2. DSR
3. TXD
4. GND
5. RXD
6. GND
7. IR OUT
8. N.C.
1. FG
2. TXD
3. RXD
4. RTS
5. CTS
6. DSR
7. GND
20. DTR
• EVI-D100/P Windows D-sub 9 pin
VISCA IN