Sony MKS-2010 - Manual (Page 79)

Cha
p
te
r 5
Ba
si
c Op
er
a
tio
ns
79
Composing Video With Keys
To select a key fill
1
In the Key >M/E Key1 >Main menu (see page 77), press [Key Fill].
A popup window appears.
2
Press one of the following.
Key Bus: Key fill bus signal selected in the AUX bus control block.
Matte: Signal generated by internal color matte signal generator. When this
is selected, you can select the matte color as explained in the next
section “To adjust the key fill color.”
3
If you selected “Key Bus” in step 2, first press the [KEY1] button in the
AUX bus control block, lighting it, then press the [SRC BUS] button,
extinguishing it, and finally select the key fill from the cross-point button
row. (See the following figure.)
KEY1 button
SRC BUS button (lit)
Cross-point button row
1.5 M/E panel 1 M/E panel
KEY1 button
SRC BUS button (lit)
Cross-point button row
KEY button
KEY button