Sony MKS-2010 - Manual (Page 122)

Cha
p
te
r 6
Ad
v
a
nce
d Op
er
a
tio
ns
122
Frame Memory
For example, if you select [FM2 V/K], the thumbnails
in the Freeze menu (see page 120) change to [FM2V]
and [FM2K].
To delete a freeze image
Press [Frz Off]. The thumbnails in the Freeze menu
([FM1V] and [FM1K] in the figure on page 120) change to
black.
Recalling Freeze Images Saved in
Frame Memory
1
From the top menu, select Frame Memory >Recall.
The Recall menu appears.
2
To change the frame memory output destination
([FM1] in the above figure), press [FM Output].
For details, see “To select frame memory output”
(page 121).
3
Press [Pair], turning it on/off.
The selection for operation changes as follows.
On: Only Pair files appear in the list, and the operation
applies simultaneously to the video and key files.
Off: The list shows both Pair files and Single files, and
operations apply separately to the video and key
files.
About Single files and Pair files, see “Saving files with
[Pair] on/off” (page 121).
4
When [Pair] is turned off, press one of the output
buttons, to select it for the operation.
The selected button turns light blue.
5
Do one of the following to select the image file to
recall.
• Press directly on the list appearing in the status area.
• Press the list arrow buttons.
• Turn the knob.
Freeze image selection in the list is reflected in
thumbnail selection, and vice versa.
6
If [Pair] is off, press the [Video] or [Key] thumbnail to
select the target.
The selected button turns light blue.
7
Press [Recall].
This recalls the freeze image, which appears in
[FM1V] and/or [FM1K].
Managing Image Files
Renaming an image file
1
From the top menu, select Frame Memory >Rename.
The Rename menu appears.
Regardless of whether pair mode is on or off, all saved
frame memory image files appear in the list.
2
Select the file to operate on.
• Press directly on the list appearing in the status area.
• Press the arrow buttons to select from the list.
Output of selected frame memory
List of saved image files
Video
Key
Thumbnails of saved freeze images
(change with selection in the list)
Knob Description Setting values
1 (No) File number 1 to number of saved image
files
Names of the selected image files