Sony MKS-2010 - Manual (Page 144)

Ch
ap
te
r
7
File
Op
er
at
ion
s
144
Operating on Individual Data Files
A confirmation window appears asking if you want to
execute the copy.
11
Press [Yes] in the confirmation window to execute the
copy, or [No] to cancel it.
If you pressed [Yes], the copy begins and a window
opens to show its progress.
To cancel a file copy after it has started
Press [Cancel] in the progress window, and press [OK]
in the message box which appears to inform you that
the copy has been cancelled.
Common Operations – Selecting the
Frame Memory Category and the
Target Media
With a file operation menu displayed, proceed as follows.
1
Press [Category Sel].
A popup window appears.
2
Select [Frame Memory], and press [OK].
The popup window closes.
3
To change the media selection from the current
selection to the other type, press one of the following
buttons, depending on the file operation.
A popup window opens.
“1 SYSTEM” is specified as the target directory. (No
other directory can be selected.).
4
Press the button for the desired media type (Hard Disk
or Memory Stick), and press [OK].
The popup window closes.
File
operation Media to select Button to
press
Load Load source media [Source Dir]
Save Save destination
media [Dest Dir]
Delete Media where target file
is saved [Target Dir]
Rename Media where target file
is saved [Target Dir]
Copy Copy source media [Source Dir]
Copy destination
media [Dest Dir]