Sony MKS-2010 - Manual (Page 57)

Cha
p
te
r 5
Ba
si
c Op
er
a
tio
ns
57
Selecting Effects
Selecting Effects With the Flexi Pad Control Block
1
Press the [EFF/WIPE] button in the Flexi Pad control block.
2
Select the setting target with the delegation buttons.
• To set the M/E bank, press the [M/E] button.
• To set the PGM/PST bank, press the [PP/ALL] button (when using a 1.5
M/E panel).
3
Press the [PTN NO.] button, lighting it in green.
(The [PTN NO.] button lights alternately in green and orange each time it is
pressed.)
An effect number can be entered now.
4
Enter the number of the desired effect pattern.
If the number begins by 0, 00, or 000, it is needless to input these zeros. For
example, when the number is 0001, input the digit 1 only.
Wipe pratterns selectable in the PGM/PST bank are limited to 0001 to 0024,
0901, and 0902.
5
4 1 2
3 5
4 1 2
3
1 M/E panel 1.5 M/E panel
EFF/
WIPE
SNAP
SHOT PP/
ALL
BANK
SEL
TRANS
RATE
M/E
MCRO STORE
7 8 9
4 5 6
1 2 3
10 ENTR
PTN
NO.