Sony MKS-2010 - Manual (Page 58)

Cha
p
te
r 5
Ba
si
c Op
erat
io
ns
58
Selecting Effects
Refer to “Effect Pattern List” in the Appendix (separate document) for more
information about effect patterns.
The entered effect pattern number appears in the numeric display.
Note
Effects numbered 1001 and higher cannot be used when:
• Multiple next transition selections have been made.
• Key priority (KEY PRIOR) has been selected as the transition type.
To re-enter the pattern number
Press the [PTN NO.] button so that it changes back to lit in orange, then
repeat the procedure from step 3.
5
Press the [ENTR] button.
This confirms the effect pattern number entered in step 4.
When an invalid pattern number is entered
A warning tone sounds and the system exits pattern number input mode.
Check the correct pattern number and repeat from step 3.
Selecting Effects From Menus
1
From the top menu, select Effect/Wipe >M/E Effect >Main.
The Main menu appears.
(The example in the above figure shows effect pattern 0002 selected. See
page 61 for an example of the screen when a pattern numbered 1001 or
higher is selected.)
2
Press [Pattern].
A popup window appears.