SBC comm AMD SBC-770 - Manual (Page 26)

Chapter 2 Installation 15
CPU installing and upgrading
You can upgrade to a more powerful Pentium II CPU at any time.
Simply remove the old CPU, install the new one, and set the
jumpers for the new CPU speed.
Warning! Always disconnect the power cord from your
chassis when you are working on it. Do not
make connections while the power is on as
sensitive electronic components can be dam-
aged by the sudden rush of power. Only experi-
enced electronics personnel should open the
system chassis.
Caution! Always ground yourself to remove any static
charge before touching the system board.
Modern electronic devices are very sensitive to
static electric charges. Use a grounding wrist
strap at all times. Place all electronic components
on a static-dissipative surface or in a static-
shielded bag when they are not in the chassis.
When you install a new CPU, be sure to adjust the board settings,
such as CPU frequency ratio. Improper settings may damage
the CPU.