Sony CCU-D50P - Manual (Page 14)

14
Overview
When Using the RM-M7G
Remote Control Unit
The RM-M7G Remote Control Unit can be connected
directly to this unit. When this unit is powered on, it is
set up to control the camera/camcorder. If you have
connected an RM-M7G, do the following to set up this
unit and the RM-M7G for control from the RM-M7G.
1
Set the system setting switches (see “qh System
setting switches”on page 18) on the front panel of
this unit according to the connected device.
2
Do the following on the RM-M7G.
• Set the CAMERA SELECT switch to 1.
• Press the PANEL ACTIVE button.
To control the video camera from this unit
Press the PANEL ACTIVE button on the front panel.
Note
When the camera is being controlled from the front
panel of this unit or during automatic white/black
balance adjustment, the PANEL ACTIVE button on
the RM-M7G may not work. If this occurs, press the
RM-M7G PANEL ACTIVE button after completion of
the camera control operation from the front panel of
this unit or automatic white/black balance adjustment
operation.