Samsung DVD-R2000 - Manual (Page 19)

19
To Watch TV and Playback a VCR (or Other Equipment)
Connections
If you want to watch TV
1. Plug the incoming antenna(AIR) or cable antenna(CATV) into the VHF/UHF INPUT terminal
on the DVD-R2000.
2. Connect a coaxial cable between the VHF/UHF OUTPUT terminal on the DVD-R2000 and
the ANT INPUT terminal on the TV.
3. Press RETURN/INPUT button to select TV input signal. (DVD-R2000 stop mode)
4. Press CHANNEL UP/DOWN button to select the channel you want to watch.
If you want to playback a VCR or CAMCORDER
1. Connect a S-Video or Video cable between the S-Video or Video OUTPUT jack on the VCR
( or CAMCORDER) and the S-Video or Video INPUT jack on the DVD-R2000.
2. Connect Audio cables between the Audio OUTPUT jacks on the VCR ( or CAMCORDER)
and the Audio INPUT jacks on the DVD-R2000.
3. Press INPUT SELECT button to select the input signal (L1, L2 or L3) connected to the VCR or
the camcorder (DVD-R2000 stop mode).
VCR
Camcorder
TV