Salton, Inc Jug kettle GK-1202 - Manual (Page 4)

7. Return the Kettle to the Power Base or place on a heat resistant surface
after use.
8. If the Kettle is accidently switched on when empty, the thermostat will
automatically shut it off to prevent the Kettle from overheating. If this
situation occurs, unplug the Power Base and let the Kettle cool before
refilling.
9. It is recommended that the power cord be disconnected from the wall
outlet when not in use. DO NOT attempt to connect any other appliance to
the Power Base or tamper with the connector in any way.
CARE AND CLEANING
1. Unplug power cord from wall outlet. Empty out remaining water and allow
Kettle to cool before cleaning.
2. Use a soft damp cloth to clean the outside of the kettle.
DO NOT USE ABRASIVE CLEANERS.
DO NOT IMMERSE KETTLE OR POWER BASE IN WATER OR OTHER LIQUID.
DO NOT ALLOW WATER TO ENTER THE POWER BASE.
3. Under normal use, a deposit of scale may form on the inside of the Kettle
and cause some discolouration. Scale, which has accumulated inside the
Kettle, can be removed by boiling equal parts of white vinegar and water
(500 ml / 2 cups of each is recommended). Once the water has boiled,
allow mixture to stand several hours or overnight. Empty out mixture and
fill Kettle to the MAX level with fresh water. Bring water to a boil and
discard. For heavy scale build-up, repeat this process.
NOTE: This build-up can be delayed by pouring out old water and refilling
before each use.
GLASS BREAKAGE
The highest quality tempered glass is used in the manufacture of this Kettle.
This material is quite durable. However, glass is still breakable under certain
conditions. To ensure long lasting use, prevent the glass from contacting hard
objects such as faucets, cabinets and metal utensils.
4
Booklet_GK-1202_Eng.qxd:Silhouette 3/12/10 3:54 PM Page 4