Samsung W87D - Manual (Page 18)

Preparing
Connecting a Power Source
18
ENGLISH
✤ There are two types of power source available.
-
Using the AC Power Adapter : used for indoor recording.
- Using the Battery Pack: used for mobile recording.
To use the AC Power Adapter
1. Connect the AC Power Adapter to a AC cord.
2. Connect the AC cord to a wall socket.
Note: The plug and wall socket type can be different according to the regional conditions.
3. Connect the other end of the DC cable to DC jack of the camcorder.
4. To set the camcorder to CAMERA mode.
a. Hold down the tab of the power switch and push the switch to CAMERA mode.
b.
Make sure that the Lens Cap is opened.
c. Make sure that the image appears in the Viewfinder.
Note: If the adapter is used next to the TV or the camcorder, it may cause the TV or camcorder to emit noise.
Move the adapter away from the TV, camcorder or the antenna cable.
2
1
3
CAMERA
00606F VP-W80/W87 UK (1-19) 2/17/03 11:22 AM Page 18