Sharp SYNCMASTER 240T - Manual (Page 24)

English 22
Screen is blank and
power indicator light is
steady amber or blinks
every 0.5 or 1 seconds n The monitor is using its power
management system.
n Move the computer’s mouse or
press a key on the keyboard
Power Saver, page 20.
Image is not stable and
may appear to vibrate n Check that the display
resolution and frequency from
your PC or video board is an
available mode for your monitor.
On your computer check: Control
Panel, Display, Settings Display Modes, page 25.
n If the setting is not correct, use
your computer utility program to
change the display settings. Installing the Video Driver,
page 6.
NOTE: Your monitor supports multiscan display functions within
the following frequency domain:
n Horizontal frequency:
Vertical frequency:
Maximum refresh rate: 30 kHz-81 kHz
56 Hz-85 Hz
210T: 1600 x 1200 @ 60Hz
240T: 1920 x 1200 @ 60Hz
Image is not centered
on the screen. n Adjust the horizontal and
vertical position. H-Position, page 13.
V-Position, page 13.
You need the monitor
driver software n Download the driver from WWW
pages:
http://samsungelectronics.com/
support/downloads/monitor/
index.html
Table 3. Troubleshooting – Image ( Continued )
What you see... Suggested Actions Reference
Appendix
body2.fm Page 22 Monday, September 18, 2000 8:53 AM