Samsung DMT300 Series - Manual (Page 9)

setting up your dishwasher _9
CyCle
SeleCTOR
You can select the appropriate wash cycle depending on the soil level of your
dishes. When you select a cycle, the indicator for that cycle lights up. If you
want to cancel the selected cycle, press the selected cycle button again.
If an error occurs during an operation, an error message is illuminated with a
warning sound. Refer to the information codes page.
CANCel &
dRAIN
To cancel & drain a cycle currently running, hold down both the heavy and
delicate buttons for three (3) seconds.
pOWeR
When pressed, all indicator lights turn on and off and the most recently
finished cycle light lights up.
When the dishwasher is running and a selected cycle is finished, the
“Clean”
light is illuminated for 10 minutes. The Power turns off automatically.
START & pAUSe
In Power on condition, close the dishwasher door and select the cycle and
desired options. Press the
Start/pause button to begin the cycle.
When you want to pause the dishwasher while running, press the Start/
pause button and make sure to open the door slowly and carefully.
01 setting up your dishwasher
4
2 3 5 4 7
1 6
5
6
7
DMT300-00062A .indb 9 2010-03-26 �� 1:57:34