Sony PCS-TL50 - Manual (Page 2)

T
W
+
PCS-RTL50
1 2 3
4 5 6
7 8 9
0
CONNECT/
DISCONNECT HELP 1 6 5 4 3 2
ZOOM
INPUT SELECT
FAR/NEAR
RETURN
PinP
PandP VOLUME
MENU
BACK SPACE
CLEAR
SYMBOL
ALPHA/NUM
WIDE MODE
BACK LIGHT
CAPTURE IMAGE
MIC
ABC DEF
JKL GHI MNO
TUV PQRS WXYZ
DISPLAY
SELECT
PC/VIDEO VIDEO CONF
ENTER
ON/OFF
Remote Control Guide: Operations available during communication
For details on operations, refer to the Operating Instructions.
Switching the picture on the display
Each press of VIDEO CONF switches
the picture.
Note: You can switch among the
available pictures only.
Switching on/off the local
microphone
Adjusting the sound
of the remote party
To increase
the volume
To decrease
the volume
Displaying the menu
available during
communication
DSB picture or
picture received
from a whiteboard
Picture of the
local or remote
camera
Still image
transmitted or
received
VOLUME
Adjusting the camera
zoom
To enlarge
the picture
To reduce
the picture
Monitoring the local and remote pictures
simultaneously
Press PandP once to enter the PandP mode, and
press it again to change the sizes of the pictures.
ZOOM
T
W
Selecting the displayed picture and
the camera
Display: Select the “Near” or “Far” picture
to be displayed on the display.
Control: Select the “Near Camera” or “Far
Camera” to be controlled.
Display Control
Display Control
Far
Near
Camera
Changing the location of the window picture
Each press of PinP changes the location of the window.
Display
Ending the
conference
Presetting the camera angle
Press button 1 to 6 quickly to move the
camera to the preset position.
Hold down button 1 to 6 to preset the
current camera position.
Note: If you press button 1 to 6 quickly
when there is no preset setting, the camera
moves to the center position.
CONNECT/
DISCONNECT
No window
Note: The PinP feature is
available during communication
only.
Note: The PandP feature is available during communication only.
“IPELA” and are trademarks of Sony Corporation.