Sanyo NV-E7000 - Manual (Page 15)

_ _
14
SIGNAL
SAME STEPS
BLACK LEVEL
WHITE LEVEL
V
B B
V
B W
V
B W
BLACK-WHITE VOLTAGE
V
B B
BLACK-BLACK VOLTAGE
Figure1
Right and left of the both ends of
the white line shall be equalized.
3. FLICKER Adjustment
< Adjustment conditions >
Adjustment shall be done with the combination of a paired LCD module.
Adjustment in TEST MODE.
Display map in NAVI MODE.
Adjust each video signal value by default value.
(BLACK : CENTER. DIMMER : MAX.)
1) FLICKER adjustment
Give a shock to the set, and adjust the [FLICKER] to make the FLICKER
visually optimal.
4. DISPLAY POSITION ADJUSTMENT
< Adjustment conditions >
Display the following screen in NAVI MODE, and adjust the VOLUME on the
reverse side of the LCD module to make the both ends of right and left of the
screen equalize.
Check disc.
ADJUSTMENT PROCEDURES