Sony PP-A2780 - Manual (Page 65)

Answering Machine Features
Answering Machine Features
65 US
continued
play a greeting to ask the caller
to leave a message.
make an announcement to the
caller without accepting
incoming messages when, for
example, you are away on a
long vacation. “Hello, I’m unable to answer
your call right now. Please call
again. Thank you.”
“Hello, I’m unable to answer
your call right now. Please leave
your name, number and
message after the tone.”
4
Turn Jog Dial to choose “ANNOUNCE ONLY” or
“NORMAL”, and then press Jog Dial.
You hear a long confirmation beep.
Answering mode When you wish to Pre-recorded greeting
“ANSWERING MODE”
is set to “NORMAL”
(normal mode)
“ANSWERING MODE”
is set to “ANNOUNCE
ONLY” (announcement
only mode)
Notes
• Do not allow more than 60 seconds to elapse during the operation procedure.
• The same greeting is used regardless of the answering mode. Therefore, if
you decide to change the mode, make sure that you record a new greeting to
match the answering mode.
• When “ERROR” appears on the display and five short error beeps are heard
after Jog Dial is pressed in step 4, move the cordless handset closer to the
base phone, make sure the base phone is not in use, and then start over the
procedure.
Tips
• When the base phone is in announcement only mode, “ANNOUNCE
ONLY” will appear on the standby mode display.
• When you select “(GO BACK)”, you can return to the previous set display by
pressing Jog Dial.