Sony PP-A2780 - Manual (Page 14)

Getting Started 14 US
Preparing the battery pack
Charge the battery pack for more than 12 hours before you start using
your cordless handset.
1
Slide open the battery
compartment lid of the cordless
handset.
2
Connect the battery connector
with correct polarity (black wire
goes on lower side and red wire
goes on upper side).
3
Hook the cords and insert the
battery pack. Then close the lid.
4
Connect the AC power adaptor
to the DC IN 9V jack of the
charger and to an AC outlet and
place the cordless handset on
the charger.
The CHARGE lamp on the
charger lights up and
“HANDSET 1” appears on the
display of the cordless handset
when the cordless handset is
properly seated on the charge
terminals of the charger. Charge
the battery pack for more than
12 hours so that the battery is
fully charged. The CHARGE
lamp remains lit even after
charging is completed.
Step 3
Black
Red
BP-T38
Hook
CHARGE lamp
To an AC outlet
Front side
AC-T127
To DC
IN 9V