Sony PP-A2780 - Manual (Page 35)

Basics
35 US
Basics
Making calls with the base phone
1
Pick up the handset or press
(SPEAKERPHONE) on the base
phone.
“TALK” or “SPEAKERPHONE”
appears on the display and the
display also shows the talk time in
hours, minutes and seconds.
2
Dial the phone number.
3
When you’re done talking, replace
the handset in the cradle or press
(SPEAKERPHONE) again.
To make a call after checking the phone number
You can dial the phone number before picking up the handset or
before pressing (SPEAKERPHONE). If you make a mistake when
dialing the phone number, press (ERASE) to erase the number.
Making calls using the EZ Access function
To set up the access number, see “Setting up the EZ
Access function” on page 23.
1
Dial the phone number (e.g.,
1-201-123-4567, or 011-...).
2
Press (EZ ACCESS).
The system dials first, the access number set up
with the EZ access function, and then the phone
number you dialed in step 1.
“SPEAKERPHONE” appears on the display.
3
When you’re done talking, or press
(SPEAKERPHONE) again.
Note
If you have set up a phone number with the EZ access function, just press
(EZ ACCESS) to dial the phone number (i.e. skip step 1).
continued
(SPEAKERPHONE)
(VOL -)
(EZ ACCESS)
(HOLD) (*TONE)
(REDIAL/PAUSE)
(ERASE)
(CALL WAITING/ FLASH)
(PROGRAM)
(VOL +)
SPEAKERPHONE
RING OFF MASSAGE OLD NEW
E 12011234567
Jog Dial