Sony PP-A2780 - Manual (Page 41)

Basics
41 US
Basics
Receiving calls with the base phone
1
When you hear the phone ring,
pick up the handset or press
(SPEAKERPHONE) on the base
phone.
“TALK” or “SPEAKERPHONE”
appears on the display and the
display also shows the talk time in
hours, minutes and seconds.
2
When you’re done talking, replace
the handset in the cradle or press
(SPEAKERPHONE) again.
To obtain the best speakerphone
performance, see page 36.
continued
(SPEAKERPHONE)
(VOL -)
(HOLD)
(CALL WAITING/ FLASH) (VOL +)
To
Adjust the handset or
speakerphone volume
Put a call on hold
Switch to another call
(“call waiting” service*)
Adjust the ringer volume
of the base phone
* You need to subscribe to the service from your telephone company.
Do this
During phone conversation, press (VOL +) or
(VOL -).
There are 3 steps for the handset volume level, and
7 steps for the speakerphone volume level.
Press (HOLD). “HOLD” appears on the display.
Press (HOLD), (SPEAKERPHONE), or pick up the
handset from the base phone to resume the
conversation.
Press (CALL WAITING/ FLASH).
Press (CALL WAITING/ FLASH) again to return to the
first caller.
Press (VOL +) or (VOL -). The ringer volume can
be adjusted to three different levels: high, low, and
off. If the ringer is set to off, “RING OFF” will
appear on the display.
Additional tasks