Sharp TINSZ2601RCZZ - Manual (Page 18)

16
Single item entries
Department entries
The cash register provides a maximum of 99 departments for a merchandise classification. Group attributes,
such as taxable status, are applied on items when they are entered to the departments.
• When using the department keys (for department 1 to 32)
For department 1 to 16, enter a unit price and press a department key. If you use a programmed unit price,
press a department key only.
For department 17 to 32, enter a unit price, press the
D key and press a department key. If you use a
programmed unit price, press the D key and press a department key.
* 1 Less than the programmed upper limit amounts
When zero is entered, only the sales quantity is
added.
* 2 For the optional departments 17 through 32,
press the
D key.
• When using the department code entry key
Enter a department(dept.) code and press the d key, then enter a unit price and press the d key again. If
the dept. code is programmed to preset price entry style and a unit price is preset, your cash register will finish
its registration operation.
* 1 Less than the programmed upper limit
amounts
When zero is entered, only the sales
quantity is added.
PLU/sub-department entries
For another merchandise classification, the cash register provides a maximum of 2000 PLUs/sub-departments.
PLUs are used to call up preset prices by a code entry. Sub-departments are used to classify merchandise into
smaller groups under the departments. Every PLU and sub-department has a code from 1 to 2000, and should
belong to a department to obtain attributes of that department.
The cash register is pre-programmed to PLU mode and zero for unit price. To use PLU entries, their preset unit
prices should be previously programmed. (Refer to page 35.)
To use sub-department entries, change to sub-department mode for the PLU codes.
• PLU entries
• Sub-department (open PLU) entries
* Less than the programmed upper limit
amounts
When zero is entered, only the sales
quantity is added.
PLU code
(1 to 2000)
p
Unit price *
(max. 7 digits)
p
PLU code
(1 to 2000)
p
Dept. code
(1 to 99)
Unit price * 1
(max. 7 digits)
When using a programmed unit price
(In case only preset price entry is allowed.)
d d
Department key Unit price * 1
(max. 7 digits)
When using a programmed unit price
D
* 2
Item Entries 3
A22S_2 FOR THE OPERATOR 09.10.16 5:41 PM Page 16