SIIG 2S1P User Manual
Page 7
7
Windows Server 2003
1.
At the Found New Hardware Wizard,
For Server 2003: Select Install from a list or specific
location (Advanced), then click Next.
For Server 2003 SP1 or later: Select No, not this time,
click Next. Select Install from a list or specific
location (Advanced), then click Next.
2.
Insert the driver CD, check Include this location in
the search, uncheck the other box, type in
X:\2S1P\2003, then click Next. (Change X: to match
your CD-ROM drive letter)
3.
At the Hardware Installation window, click
Continue Anyway, then click Finish.
4.
Repeat steps 1-3 three times.
5.
Restart Windows to complete the installation.
64-bit Windows Server 2003
1.
At the Found New Hardware Wizard, select No, not
this time, click Next.
2.
Select Install from a list or specific location
(Advanced), click Next.
3.
Insert the driver CD, check Include this location in
the search, uncheck the other box, type
X:\2S1P\64bit, click Next. (Change X: to match
your CD-ROM drive letter)
4.
Click Continue Anyway, then click Finish.
5.
Repeat steps 1-4 three times to complete the
installation.