Sony HT-SL7A - Manual (Page 24)

24
Using the Sleep Timer
You can set the amplifier to turn off
automatically at a specified time.
Press SLEEP on the remote while the
power is on.
Each time you press the button, the display
changes cyclically as follows:
2-00-00 t 1-30-00 t 1-00-00 t 0-30-00
t OFF
The display dims after you have specified the
time.
Tips
• You can freely specify the time. After pressing
SLEEP, specify the time you want using the cursor
buttons (
U or u) on the amplifier. The sleep timer
can be set with an interval of 1 minute between
1 minute and 5 hours, and with an interval of
1 second for less than 1 minute.
• To check the remaining time before the amplifier
turns off, press SLEEP. The remaining time
appears in the display.
Other Operations
Adjustments using the
SET UP button
The SET UP button allows you to make the
following adjustments.
1
Press SET UP.
2
Press the cursor buttons ( U or u ) to
select the parameter you want to
adjust.
When you select MULTI VI. or TUNER
VI., M[XXX] or T[XXX] appears in the
display after about 2 seconds.
3
Press + or – to select the setting you
want.
The setting is stored automatically.
4
Repeat steps 2 to 3 until you have set
all of the parameters that follow.
Initial settings
Parameter Initial setting
MULTI VI. DVD
TUNER VI. OFF
x MULTI CH IN visual select
Lets you specify the video input to be used
with the audio signals from the MULTI CH
INPUT jacks.
x TUNER visual select
Lets you specify the video input to be used
with the audio signals from the TUNER jacks.