Sony TC-TX1 - Manual (Page 5)

GB
5
Chapter 1: Setting up
STEP 1
STEP 3
STEP 4
Left speaker
STEP 5
Right speaker
AM loop aerial (supplied)
Tuner CD player
Stereo cassette deck
Mains lead
to the wall outlet
FM lead aerial (supplied)
! Do this connection last ! Flat cord* (supplied) Audio cord (supplied) Mains lead Speaker cable (supplied)
STEP 4 Connecting the
Aerials
To improve the reception
Connect an external aerial (p.19).
To set up the AM loop aerial
STEP 5 Connecting the
Power
Connect the mains lead of the tuner CD
player to the wall outlet after you have
made all the above connections.
Notes
• You can remove the front net from the
speaker.
• The AU BUS (audio bus) connector on the
rear panel of the tuner CD player is used to
connect the optional Sony MDS-MX1
MiniDisc deck. See the instruction manual
for MDS-MX1 in detail.
AM loop aerial**
(supplied)
FM lead aerial* (supplied)
* Fix it to the place for optimum reception.
** Orient it toward the direction for optimum
reception.
SA-N1**
* For only the customers using the TC-TX1 stereo cassette deck
**The rear view of the SA-N11 differs from the illustration.
STEP 2