Setting up play back functions – Samsung 6806-1247 User Manual
Page 65
SETTING UP PLAY BACK FUNCTIONS
LCD
You may adjust the LCD brightness.
1. Turn the camera power on.
2. Rotate the mode dial to the PLAY mode.
3. Do not turn the LCD monitor off.
4. Press MENU button to display the menu on the LCD monitor.
Press UP (
) / DOWN (
) button and select [LCD].
5. Press the RIGHT (
) button to select [BRIGHTNESS].
6. The cursor can be moved by pressing the RIGHT (
)
button to the [BRIGHTNESS] sub menu.
7. Select the desired sub menu by pressing the UP (
) /
DOWN (
) buttons. The LCD monitor has 9 brightness settings.
8. After selecting the desired sub menu, press the OK button to confirm the setting.
9. Press the MENU button to cancel the menu display.
FOLDER
Used for changing the folder name to 100SSCAM.
After changing the folder name, this camera will recognize an image that was taken by another digital camera.
1. Turn the camera power on.
2. Rotate the mode dial to the PLAY mode.
3. Press MENU button to display the menu on the LCD
monitor.
4. Press UP(
) / DOWN(
) button and select [FOLDER].
5. The cursor can be moved by pressing the RIGHT(
)
button to the [FOLDER] sub menu.
6. Press the OK button to change the folder name.
FOLDER
100SSCAM
SELECT
OK SET
LCD
SELECT
OK SET
8
2
4
6
0
5