Samsung Digimax U-CA - Manual (Page 85)

85
Warning indicator
There are several warnings that may appear on the LCD display
Warning indicator Causes Remedy
- Turn off the camera power and turn it on again
- Insert the memory card again
- Format the memory card (p.66)
- Memory card error
- There is insufficient memory
capacity to take an image
- There are no images stored
on the memory card
- A memory card is not inserted
- The camera can t recognize
the memory card
- File error
- Memory card error
- There is low battery capacity
- The memory card is locked
CARD ERROR !
CARD FULL !
NO IMAGE !
NO CARD !
FILE ERROR !
LOW BATTERY !
CARD LOCKED !
- Insert a new memory card
- Delete unnecessary image files to free up some
memory
- Take images
- Insert a memory card that is holding some
images
- Insert a memory card
- Insert the memory card again
- Turn off the camera power and turn it on
again
- Format the memory card
- Contact a camera service center
- Insert fresh batteries
- Slide the write protect switch to the bottom of
the memory card.(p.16)
- When taking pictures in dark
places
LOW LIGHT !
- Use a tripod and take pictures in Flash
Photography mode.