SIIG 104-0732A - Manual (Page 3)

3
Dip Switch
• Re-Clock: Receives a signal and retransmits
it at a higher level and /or higher power, or
onto the other side of an obstruction, so the
signal can cover longer distances
• LB SEL0: Disabled (Not used)
• LB SEL1: Disabled (Not used)
Note: Pin up: Enabled (on)
Pin down: Disabled (off)
Figure 2: Dip Switch
LB SEL1
(Not used)
Re-Clock LB SEL0
(Not used)