Samsung SWL-2210M - Manual (Page 42)

42
3.6 Installation Procedure of Windows XP
Please follow the following steps one by one in order to install the MiniPCI/PCI Card
successfully.
< Method 1 - Inserting card first >
1. Insert the MiniPCI/PCI Card into slot of your computer.
2. Power on your computer and allow Windows XP to load fully.
3. “Found New Hardware Wizard” appeared and the system looks for “Network
Controller”. Insert the MagicLAN Installation CD into the CD-ROM Drive.
4. You can find the “ SAMSUNG 11Mbps WLAN MiniPCI/PCI Card ” and system
will copy driver files.
5. Now driver files are fully installed to start the Wireless LAN Card’s operation.
6. Check for the SAMSUNG 11Mbps WLAN MiniPCI/PCI Card on Computer
Management in the Administrative Tools of the Control Panel. If you find the
Yellow sign on the adapter, it shows the installation is not successful. In this case,