Sony DADC - Manual (Page 17)

15
Film Specifications
Density
To be able to process your label films optimally the
minimum film density has to be 3.0 in full tone.
Duplex/triplex print (half-tone print) with
Pantone colours
We will need smooth, full-page screen printing
films (positive, right side reading, emulsion up)
from you prepared as follows:
For duplex and triplex prints please use the follow-
ing angle codes: 0˚, 15˚, 45˚ or 75˚. With other
angle codes a ‘moiré-free print’ is not provided.
Four-colour print - Picture Disc
We will need smooth, full-page screen printing
films (positive, right side reading, emulsion up)
from you prepared as follows:
To achieve favourable printing results we need a
compulsory colour copy such as Cromalin,
Matchprint, Pressmatch or test print.
Please take into account that there may be colour
deviations from the original copies due to the
different consistency of the base.
Four-colour print - High Definition Picture Disc
We will need smooth, full-page screen printing
films (positive, right side reading, emulsion down)
from you prepared as follows:
To achieve favourable printing results we need a
compulsory colour copy such as Cromalin,
Matchprint, Pressmatch or test print.
Please bear in mind that the base of the DVD
consists of polycarbonate with reflecting aluminium
coating and therefore there may be colour
differences compared to the printwork
(paper/carton).
To provide (as much as possible) conformity of
colours of printed matter (printwork) and the DVD
label print, we advise to preprint a full white base
on the DVD.
For Picture and/or High Definition Picture Disc print-
ing Sony DADC can prepare four-colour
separation/litho production of the label films for
you. For materials required please refer to chapter
4.9. on page 19.
● Line width 54 l/cm
● Angle codes:
cyan 75˚
magenta 45˚
yellow 0˚
black 15˚
or angle codes similar to the
Hell and Crossfield system.
● Density 15 - 85 %
● Elliptic dot shape
● Line width 80 l/cm
● Angle codes:
cyan 75˚
magenta 45˚
yellow
0˚
black 15˚
or angle codes similar to the
Hell and Crossfield system.
● Registration marks to be centered only
as shown in diagram page 18/chapter 4.5.
● Line width 34 l/cm
● Angle code 45˚
● Max. density 15 - 85 %
● Elliptic dot shape