Samsung SCM-100R - Manual (Page 21)

14
How to Connect
4. Installing your InfoRanger™ to an Ethernet
Plug one end of the Ethernet cable into a cable modem Ethernet jack and the
other end into a PC Ethernet card.
5. Cable Modem Service Authorization
5.1 MAC Address
You do not need to configure the MAC address of your InfoRanger™.
The unit has a built-in MAC address.
5.2 IP Address
You also do not need to configure the IP address of your unit.
The InfoRanger™ gets an IP address from a DHCP server in a CATV network
during the power-on cycle.