Socket Mobile Cordless Serial Adapter - Manual (Page 26)

General Properties
The General properties page displays general device identification,
device class, and service class information. This page appears for both
acceptor and initiator modes.
Friendly Name: If desired, enter a new name. For example, you may want
the friendly name to reflect which device you plan to attach it to.
Class of Device/Service Class: ADVANCED USERS ONLY!
If the CSA is in Acceptor mode, and the Bluetooth device initiating the
connection can only detect and/or connect to certain device/service
classes, make the appropriate selection(s). For more information, please
refer to the Bluetooth Assigned Numbers document at:
http://www.bluetoothsig.org/assigned-numbers/baseband.htm
Note: If no configuration is loaded, no Bluetooth Address will appear.
IMPORTANT!
After entering all the adapter properties, click OK to exit the
properties screen. Then click Write to adapter, or the CSA will not
be configured with the new settings!
26