Display backlight, Lock switch, Earphones – Sangean DT-220A User Manual

Page 10

Advertising
background image

GB

Display backlight

Pressing the Light button will switch on the display

backlight and illuminate the display for approximately

7 seconds.

Lock switch

The lock switch located on the right side of your

radio is used to prevent unintentional operation.

1. Slide the Lock switch to the up ‘ locked ‘ position,

the symbol will appear is the display.

The Power and all other buttons will be disabled

except the Light button. This will prevent accidental

operation when the radio is packed in a suitcase.

To release the Lock switch, move the switch to the

down ‘unlocked’ position, the symbol will be

removed from the display.

Earphones

The earphones fitted to your radio are equipped with

an auto wind system to allow for easy storage.

1. Gently pull out the earphones from the right hand

side of the radio.

2. Slide the Loudspeaker/Headphone switch to the

position, the loudspeaker will mute.

3. to retract the earphones, slide the switch on the

rear of the cabinet. Hold onto the earphones while

they rewind into the cabinet.

4. Slide the Loudspeaker/Headphone switch to the

position to return to normal operation.

9

Advertising