Sharp Notevision PG-A10X - Manual (Page 44)

-40
Picture Display Mode
Switching the Picture Dis-
play Mode
Press .
• Pressing
changes the display as shown on
pages 40 and 41 .
• To return to the standard image, press
while
“ RESIZE ” is displayed on the screen.
This function allows you to modify or customize the picture display mode to enhance the
input image. Depending on the input signal, you can choose “NORMAL”, “DOT BY DOT”,
“BORDER” or “STRETCH” image.
4:3 aspect ratio
Other aspect ratios
SVGA (800 × 600)
XGA (1024 × 768)
SXGA (1280 × 960)
SXGA+ (1400 × 1050)
SXGA (1280 Ч 1024)
1280 Ч 720
NORMAL
1024 Ч 768
1024 Ч 768
1024 Ч 768
1024 Ч 768
960 Ч 768
—
DOT BY DOT
800 Ч 600
—
1280 Ч 960
1400 Ч 1050
1280 Ч 1024
—
COMPUTER
BORDER
768 Ч 576
768 Ч 576
768 Ч 576
768 Ч 576
720 Ч 576
—
STRETCH
1024 Ч 576
1024 Ч 576
1024 Ч 576
1024 Ч 576
960 Ч 576
1024 Ч 576
STRETCH
Projects 16:9 image evenly over entire
screen (top/bottom blank bands).
Output screen image
Input Signal
Image type Computer
NORMAL
Projects a full screen image
while maintaining the aspect ratio.
DOT BY DOT
Projects the original resolution
signal of the image.
BORDER
Projects 4:3 image fully in STRETCH
(the following column) image.
Resolution lower
than
XGA
4:3 aspect ratio
4:3 aspect ratio
4:3 aspect ratio
5:4 aspect ratio
16:9 aspect ratio
XGA
Resolution higher
than
XGA
1280 × 720
SXGA (1280 × 1024)
: Cutout area on which images cannot be projected.
: Area where the signals are off screen.
* Mode for projecting an image with the original aspect ratio without cutting any portions.
* * *
* *
* *
* *
*
RESIZE
button
UNDO
button