Silvercrest KH 2131 - Manual (Page 8)

6
Setting up and connecting
KH 2131
GB
IE
Setting up and connecting
Safety instructions
WARNING
Damage may occur to people and property when operating
the device!
Observe the following safety information to avoid any risks:
Packaging material may not be used as a play thing. ►
There is a risk of suff ocation!
To avoid risks to persons and property, pay heed to the requirements for
►
the installation site and for the electrical connection.
Items supplied and transport inspection
The device is delivered with the following components as standard:
1 Radio Transmission Set (1 x transmitter, 1 x receiver) ▯
2 Power adapters ▯
1 Scart to Cinch Adapter IN (Receiver) ▯
1 Scart to Cinch Adapter OUT (Transmitter) ▯
1 Cinch to Cinch cable, (3 core) ▯
2 Cinchplug to Jackplug Cables, (3.5 mm Stereo-Jackplug) ▯
Infrared transmission diode cable (3 diodes) ▯
3 Adhesive pads for the infrared transmitter diodes ▯
Audio Adapter (3.5 mm stereo jackplug on cinch sockets) ▯
Operating instructions ▯
NOTICE
Check the contents to make sure everything is there and for visible damage. ►
If the items supplied are incomplete, or damaged due to defective packaging ►
or transportation, contact the Service Hotline (see chapter Service).
Unpacking
Remove all parts of the device and the operating instructions from the box. ‹
Remove all packing material. ‹