Smart Technologies Smart board Interactive Whiteboard system 400iv - Manual (Page 26)

Setting Use Notes
Gateway Displays the projector’s default
network gateway in values between
0.0.0.0 and 255.255.255.255.
DNS Displays the projector’s primary
domain name number in values
between 0.0.0.0 and 255.255.255.255.
MAC Address Displays the projector’s MAC address
in xx-xx-xx-xx-xx-xx format.
Group Name Displays the projector’s workgroup
name as set by an administrator
(maximum 12 characters).
Projector Name Displays the projector’s name as set
by an administrator (maximum 12
characters).
Location Displays the projector’s location as set
by an administrator (maximum 16
characters).
Contact Displays the contact name or number
for projector support as set by an
administrator (maximum 16
characters).
Language menu
Language Selects language preference. Projector menu support is available in
English (default), Brazilian Portuguese,
Czech, Danish, Dutch, Finnish,
French, German, Greek, Iberian
Portuguese, Italian, Korean, Japanese,
Norwegian, Polish, Russian, Simplified
Chinese, Spanish, Swedish and
Traditional Chinese.
Information menu
Lamp Hours Displays the current number of lamp
usage hours from 0 to 4000 hours from
when it was last reset. Always reset Lamp Hours after you
replace a lamp because lamp service
reminders are based on the current
hours of use. See Resetting the lamp
timer on page 33 for details on the lamp
hour reset procedure.
Input Displays the current input source
(VGA1, Composite, S-Video or
None).
Resolution Displays the projector’s current display
resolution.
Firmware Version Displays the projector’s firmware
version in x.x.x.x format.
C H A P T E R 3
Using your interactive whiteboard system
16