Samsung HC-R4245W - Manual (Page 29)

English - 29
O P E R AT I O N
3
Press the ENTER button.
A crosshatch pattern will
appear on the screen.
Move the cursor to the
position you want to adjust
by pressing the
▲/▼/œ/√
buttons, then press the
ENTER button.
Adjust the convergence by
pressing the
▲/▼/œ/√
buttons, then press the
ENTER button.
Red
Please Use Remote Control.
4
If a horizontal line is visible,
use the
▲ or ▼ button to
move the line so that it is
superimposed on the
horizontal center-line (i.e.,
make a single horizontal
line that is as white as
possible.).
5
If a vertical line is visible,
use the œ or √ button to
move the line so that it is
superimposed on the
vertical-center line (i.e.,
make a single vertical line
that is as white as
possible.)
After the convergence is
correctly adjusted, press
the
MENU button to exit.
Red
Please Use Remote Control.
Red
Please Use Remote Control.
Red
Please Use Remote Control.
6
To return to the factory
defaults, select “Reset”
by pressing the
▲ or ▼
button, then press the
ENTER button.
The previously adjusted
convergence will be reset
to the factory defaults.
Red √
Blue √
Reset
Manual Convergence T V
BP68-00334B-01Eng 2005/05/06 12:29 PM Page 29