SIIG 04-0735A - Manual (Page 3)

3
Pairing Keyboard
1. Turn on the Bluetooth source device's
Bluetooth function.
2. Power on the Bluetooth keyboard.
3. Press the Bluetooth keyboard's connect
button. The Pairing LED should be lit.
4. Launch the Bluetooth enabled device's
Bluetooth program. Turn on the Add/
Search/Connect device process.
Installing the Batteries
1. Remove the battery cover from the back of
the keyboard.
2. Insert the 2 AAA batteries. Make sure the
batteries are properly installed as indicated
by the image below.
3. Replace the battery cover.
Figure 3: Installing the Batteries