Sanyo PLC-XM150 - Manual (Page 2)

To enable projection in various locations, the lens lineup
extends from short to long focus lenses. No additional tools
are necessary for
changing lenses. Simply
press the button and
screw in the
interchangeable lens.
Interchangeable Lenses (Optional)
Features a highly reliable new optical engine with inorganic panels, this projector has a brightness of 6000 lumens
(XM150/XM150L) and a high contrast of 1000:1*, putting it at the top of its class in performance. Naturally suited to use in
venues such as large meeting rooms, conference rooms and lecture halls, the projector is also ideal for projecting digital
signage in bright places.
*When in 'Auto' lamp mode
High Brightness and Durable Inorganic Optical Engine System (D.I.O.S.)
Maintenance for the filter, which prevents dust from entering the projector, is an extremely
important task for sustaining projector performance. Built-in airflow sensors and atmospheric
pressure sensors detect changes in the intake airflow volume and filter clogging. If the airflow
drops level, the filter is automatically wound in to produce a below a predetermined clean
filter surface, so there is no need to manually clean the filter. The replacement cycle for the
filter cartridge is approximately 10,000 hours.* This raises reliability while lowering
maintenance costs.
Featuring both vertical and
horizontal lens shift (vertical:
+/- 50 %, horizontal: +/- 10
% (maximum)), the
PLC-XMseries enables
intuitive operation for easy
on-site setup.
Zoom and focus can be carried out
electronically, so that adjustments can be
made easily (smoothly). Of course
operations can also be carried out using
the remote control, so that adjustments
can be carried out easily from a distance
even after the projector has been installed
in a high location.
Powered Zoom and Focus
Active Maintenance Filter (AMF) System
Powered Vertical/Horizontal Lens Shift
The Corner Keystone function corrects trapezoidal distortion.
To square the image, simply designate the four corners with
the remote control or projector buttons. The corrected data is
stored in memory, so rectangular screens can be displayed
with permanently installed projectors at lecture hall and
conference room.
When projecting
from an angle
[Before correction] [After correction]
Adjusting the
four corners
Achieving four
straight corners
Corner Keystone
* Lamp Control: This value is calculated by an original SANYO test based on JIS D0207 test methods with Normal mode selected.
Lamp replacement has been simplified to make maintenance easier. Easy removal and
replacement of the lamp from the top. Of course the lamp can also be replaced easily even if
the projector is ceiling mounted.
Easier Replacement
A symmetrical design with the lens in the center of the projector has been adopted to suit
ceiling installation in particular. This allows the projector and the screen to be centered
together, which not only makes design and installation much easier, but also offers a sense of
greater stability through symmetry of the positioning between projector and screen.
Lens Center Layout (Symmetry)
50%
50%
10%
10%
The anti-theft hook lets you attach a
security device to the projector for strong
protection against theft.
The Mechanical Shutter system is popular for a variety of
professional uses. It allows this star-studded selection of
SANYO Portable projectors to meet a host of demanding
business needs, including meetings, entertainment and
promotional applications.
When using a conventional projector, you have to physically
select the input signal. Auto Input Signal Search automatically
determines the input signal when the projector is installed
and the power is turned on, and sets the input for you.
Anti-Theft Hook
Auto Input Signal Search Mechanical Shutter System
Brightness of 6,000 lumens
PLC-XM150/XM150L
PLC-XM100/ XM100L
Brightness of 5,000 lumens
The projector can be installed at a 360° tilt angle in the
vertical direction. This makes it possible to project images
facing directly above or below the projector.
The PLC-XM150/XM150L
PLC-XM100/ XM100L
can also be installed to
project images upward
or downward.
Vertical Installation
Tilted Installation Possible (360°
Tilt Angle) A Wide Range of Optional Lenses
5 different optional lenses for various uses. PLC-XM150 and
XM100 include a standard lens (LNS-S20).
Projection distance of standard lens (to 100 inch screen)
* It might be different depending on setting situation
3.3’ 16.4’ 32.8’ 49.2’
LNS-T21 30.2’ - 48.2’
LNS-T20 18.7’ - 30.2’
LNS-S20 11.0’ - 18.7’
LNS-W20 8.2’ - 11.2’
LNS-W21* 5.2’
A centralized management and control system can be easily
configured.
* This function comes as standard equipment.
Built-in LAN Network Control Function
The PJ-Net Organizer (POA-PN03C) is provided as standard
equipment, for centralized control of projectors over a wired
network. Installing the optional PJ Master into a PC or server
also lets you control the PJ-Net Organizer-mounted projectors
over a network.
Featuring the PJ-Net Organizer Box
(option: POA-PN03C)
To display the screen
image of the computer
by the projector through
the network in real time.
Real Time Capture function
PC 1 PC 1
PC 3 PC 4 PC 6
PJ 1 PJ 2
PC 5
To acquire the JPEG
image data from the file
servers placed in the
network and project
them by the projector.
Network Viewer function PJ 1
PC 1
PC 3 PC 4 PC 6
PC 5
PC 2
PJ 2
To communicate by
sharing the captured
image.User can draw the
text and figure on the
captured image by using
a drawing tool.
Network Communication function PJ 1
PC 1 PC 2 PC 5
PC 6
Capture a screen
image of PC5
and make marking
with a tool.
C
M
Y
CM
MY
CY
CMY
K
PLC-XM150_100.brochure-back.hr.pdf 2/4/10 3:23:31 PM