Canceling a cycle, Changing a cycle or setting, Adding items during a cycle – Sears 665.1359 User Manual

Page 12

Advertising
background image

12

*If the incoming water temperature is less than the recommended

temperature, the cycle will automatically compensate by adding
time and heat as needed.

Canceling a Cycle

1. Press CANCEL/DRAIN. The Cancel/Drain light glows.

2. The dishwasher starts a 2-minute drain (if needed). Let the

dishwasher drain completely. The light turns off after
2 minutes. The door must be closed for the dishwasher to
drain.

To stop the drain

You can press CANCEL/DRAIN again to stop the drain. Be sure
to drain the dishwasher before starting a new cycle.

To clear the indicators

Press CANCEL/DRAIN before starting the dishwasher to clear all
options and cycles.

Changing a Cycle or Setting

During the first minute of a cycle

1. Select a new cycle and/or options.

2. Check the detergent dispensers. They must be filled properly

for the new cycle.

3. The Start/Resume light will flash when the door is opened.

Make sure the door is closed.

4. Press START/RESUME.

After the first minute of a cycle

1. Press CANCEL/DRAIN. The Cancel/Drain light glows. Your

dishwasher starts a 2-minute drain (if needed). Let the
dishwasher drain completely.

2. Check the detergent dispensers. They must be filled properly

for the new cycle.

3. Make sure the door is closed. The Start/Resume light will

flash.

4. Select a new cycle and/or options.

5. Press START/RESUME.

Adding Items During a Cycle

You can add an item anytime before the main wash starts. Open
the door and check the detergent dispenser. If the cover is still
closed, you can add items.

To add items

1. Open the door slightly to stop the cycle. Wait for the spraying

action to stop before opening the door. The Start/Resume
light will flash.

2. Open the door. If the detergent dispenser cover is still closed,

add the item.

3. Close the door firmly until it latches. The Start/Resume light

will flash.

4. Press START/RESUME.

IMPORTANT: If Lock On is selected, turn off the lock (see Lock
On section in “Option Selections”), or the Start/Resume light will
continue to flash.

Heavy Wash

Use this cycle for loads with heavy food soil.

Use both detergent dispenser sections.

Wash

Main

Wash

Rinse or

Purge

Final

Rinse

Dry

Approximate

Time

Water

Usage
(gal/L)

Purge

2 hrs*

6.9/26.1

Normal Wash

Use this cycle for loads with normal amounts of food soil. (The
energy-usage label is based on this cycle.)

Use covered detergent dispenser section.

Wash

Main

Wash

Rinse or

Purge

Final

Rinse

Dry

Approximate

Time

Water

Usage
(gal/L)

Purge

1.5 hrs*

4.6/17.4

Light Wash

Use this cycle for china and crystal. This cycle uses a light
wash and gentle dry. During the heated dry, the heating
element cycles on and off.

Use covered detergent dispenser section.

Wash

Main

Wash

Rinse or

Purge

Final

Rinse

Dry

Approximate

Time

Water

Usage
(gal/L)

Purge

cycled

1.5 hrs*

4.8/18.2

Quick Rinse

Use this rinse cycle for rinsing dishes, glasses, and silverware
that will not be washed right away.

Do not use detergent with this cycle.

Wash

Main

Wash

Rinse or

Purge

Final

Rinse

Dry

Time
(min)

Water

Usage
(gal/L)

Rinse

10

2.2/8.3

Advertising
This manual is related to the following products: