Sony ZS-D50 - Manual (Page 18)

The CD Player
18 GB
To cancel Program Play
Press MODE until “PGM” disappears from the
display.
To check the order of tracks before play
Press ENTER•MEMORY CHECK on the player in
stop mode until “CHECK” appears in the display.
As you press = or +, the track number appears
in the programmed order.
To change the current program
Change before starting the program play.
To Do this
erase the last track in 1 Press CANCEL. Every time
the program you press the button, the last
track in the program is
cleared.
2 Re-enter the track numbers
using the number buttons.
change the whole 1 Press p on the CD section to
program completely erase the whole program.
2 Create a new program
following the programming
procedure.
Tips
• If the program play is
finished, the program is
saved. You can play the
same program again by
pressing
( on the CD
section.
• If you open the CD
tray, the program is
erased.
• You can record your
own program.
1 After you have
created the program,
insert a blank tape
into the tape
compartment.
2 Press r/P and then
( on the tape
section to start
recording. Press
(
on the CD section to
start playing the
program play.
Creating your own program (Program Play) (continued)