Lcd error messages – Samsung SCX-5112 User Manual

Page 112

Advertising
background image

T

ROUBLESHOOTING

8.11

8

LCD Error Messages

Display

Meaning

Solution

BYPASS JAM

The product detects non
feeding from the bypass
tray.

Load paper in the bypass tray.

DOCUMENT JAM

The loaded document
has jammed in the ADF.

Clear the document jam. See
page 8.2.

DOOR OPEN

The side cover is not
securely latched.

Close the side cover until it locks
in place.

DRUM WARNING

The drum cartridge is
near the end of life.

You should have a replacement
cartridge in stock.

DUPLEX JAM

Paper has jammed in the
middle of 2-sided
printing.

Clear the jam. See page 8.9.

DRUM EMPTY

The drum cartridge is out
of life.

Replace the drum cartridge. See
page 7.8.

FUSER ERROR

There is a problem in the
fuser unit.

Unplug the power cord and plug it
back in. If the problem still
persists, please call for service.

OPEN HEAT ERROR

HEATTING ERROR

OVER HEAT

INVALID
CARTRIDGE

You have used
unauthorised cartridge.

You must use a Samsung-
approved cartridge.

LINE ERROR

(for SCX-5312F only)

Your product cannot
connect with the remote
machine, or has lost
contact because of a
problem on the phone
line.

Try again. If failure persists, wait
an hour or so for the line to clear,
then try again.

Or, turn the ECM mode on. See
‘System Data Options’ in the
Facsimile User’s Guide.

LSU ERROR

A problem has occurred
in the LSU (Laser
Scanning Unit).

Unplug the power cord and plug it
back in. If the problem still
persists, please call for service.

Advertising
This manual is related to the following products: