Samsung DVD-V3650 - Manual (Page 30)

57 56
Record Speed
You can slow down the recording speed from SP to SLP in order to fit
six hours of programming on a T-120 tape.
1 Start Recording
Follow the Basic Recording instructions on page 55.
2 Set Record Speed
Press the SPEED button on the remote control to set the Record
Speed to one of the following options:
• SP – Standard Play, for best quality.
• SLP – Super Long Play, for maximum recording time (3 times SP).
NOTE: The selected Record Speed will appear on the front panel
display and on-screen display.
Maximum Recording Time - SP vs. SLP
Tape Length SP (Standard Play) SLP (Super Long Play)
T-120 2 hrs 6 hrs
T-160 2hrs 40 mins 8 hrs
T-180 3 hrs 9 hrs
2
One-Touch Recording (OTR) allows you to add recording time in
30-minute increments up to 4 hours at the touch of a button.
1 Start Recording
Follow the instructions on page 55 to begin recording.
2 Activate OTR
While in Record mode, press the REC button again to activate
One-Touch Recording (OTR).
• Record length 0:30 appears on the On-Screen Display and the
DVD-VCR will record for exactly 30 minutes.
3 Add Recording Time
Continue pressing REC to add recording time in 30 minute
increments up to 4 hours.
• The DVD-VCR stops recording automatically when the time has
elapsed.
One-Touch Recording (OTR)
RECORD
SP
Record length 0:30 07 0:30
1:00
1:30
2:00
3:00
4:00
4
1
3
2
Special Recording Features
While a recording is in progress, you can watch a different channel,
watch a DVD, or add recording time in 30-minute increments.
1 Pause/Resume Recording
Press the ❿ ll (PLAY/PAUSE) button.
Press REC again to resume.
2 Stop Recording
Press the STOP button.
3 Watch a Different Channel
Press the TV/VCR button on the remote to switch to your TV tuner,
then select a different channel on your television.
4 To Watch a DVD
Insert a DVD in the DVD deck and press Play. The output will
automatically change to the DVD.
5 Add Recording Time
See One-Touch Recording (OTR) on the next page.
00215A DVD-V3650/XAA-Eng4 5/29/03 2:47 PM Page 56