Connecting the video out to your tv, Connections – Samsung HT-TZ312 EN User Manual

Page 26

Advertising
background image

2

connections

When you have Purchased the Wireless receiving module (SWa-4000)

Do not insert any other card except the TX card dedicated to the product.

If a different TX card is used, the product may be damaged or the card may not be removed

easily.

Do not insert the TX card upside down or in the reverse direction.

Insert the TX card when the DVD Player is turned off. Inserting the card when it is turned

on may cause a problem.

If the TX Card is inserted and wireless receiving module setting is complete, sound is not output

from the Rear Speaker connectors on the main unit.

The wireless receiving antenna is built into the wireless receiver module. Keep the unit away

from water and moisture.

For optimal listening performance, make sure that the area around the wireless receiver module

location is clear of any obstructions.

if no sound is heard from the wireless rear speakers, switch the mode to DVD 5.1

channel or Dolby ProLogic ii .

In 2-CH mode, no sound will be heard from the wireless rear speakers.

`

`

`

`

`

`

`

`

Place the wireless receiver module at the rear of the listening position. If the wireless receiver
module is too close to the main unit, some sound interruption may be heard due to
interference.
If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, or any
other device that uses the same frequency (5.8GHz) near the system, some sound interruption
may be heard due to interference.
The transmission distance from the main unit to the wireless receiving module is about 33 feet
(10m), but may vary depending on your operating environment. If a steel-concrete wall or
metallic wall is between the main unit and the wireless receiver module, the system may not
operate at all, because the radio wave cannot penetrate metal.
This product(HT-Z310/HT-TZ312) is compatible with the wireless receiver module SWA-3000.

M

`

`

`

`

Plug the power cord of the wireless receiving module
in the wall outlet and switch the power switch On.

.

RESET

COnnECtinG tHE OPtiOnaL WirELESS rECEiVinG amPLifiEr (COn't)

Ht-Z310_XAA(ENG)_0201.indd 24

2008-02-01 �� 3:01:39

Advertising