Sony KF-42WE620 - Manual (Page 85)

Other Information
85
Ot
h
e
r Informa
tion
KF-42/50WE620
2-108-981-13 (1)
Audio
Channels
Problem Possible Remedies
Good picture, no sound ❏ Press MUTING so that Muting disappears from the screen (see page 49).
❏ Make sure the Speaker option is set to On in the Audio menu (see page 64).
Audio noise ❏ Communication problems may occur if infrared communication equipment (e.g.,
infrared cordless headphones) is used near the TV. Please use headphones other
than infrared cordless headphones. Also, if you use infrared communication
equipment other than infrared cordless headphones, move the infrared transceiver
away from the TV until the noise is eliminated, or move the transmitter and
receiver of the infrared communication equipment closer together.
Cannot gain enough volume
when using a cable box ❏ Increase the volume of the cable box using the cable box’s remote control. Then
press TV FUNCTION button and adjust the TV’s volume.
Sound seems weak or
insufficient ❏ The TV’s audio might be set to Auto SAP or Mono, when it might be better set to
Stereo. In the Audio menu (see page 63), set the MTS setting to Stereo. If
already set to Stereo, switch to Mono (which may reduce background noise
during weak stereo broadcasts).
Cannot raise the volume on
external speakers
❏
If the Speaker option is set to Off and the Audio Out option is set to Fixed (in
order to output the sound to your audio system) use your audio receiver to adjust
the sound (see page 63). Or, to use the TV remote control, set the Audio Out
option to Variable.
❏ To turn on the TV speakers, set the Speaker option to On (see page 64).
Problem Possible Remedies
Cannot receive upper channels
(UHF) when using an antenna ❏ Change the Cable option to Off (see page 67).
❏
Use Auto Program in the Channel menu to add receivable channels that are not
presently in the TV’s memory (see page 67).
TV is fixed to one channel
❏
Use Auto Program in the Channel menu to add receivable channels that are not
presently in the TV’s memory (see page 67).
❏
Check your Channel Fix settings (see page 67).
Cannot receive any channels
when using cable TV ❏ Use Auto Program in the Channel menu to add receivable channels that are not
presently in the TV’s memory (see page 67).
❏ Check your cable settings.
❏
Make sure the Cable option is set to On in the Channel menu (see page 67).
Cannot receive or select
channels ❏ Use Auto Program in the Channel menu to add receivable TV channels that are
not presently in TV memory (see page 67).
Cannot receive digital channels
(when a digital TV receiver is
connected)
❏
Check the connections between the digital TV receiver and the LCD projection
TV (see page 43).
❏ Check your local listings to find out if you can receive digital broadcasts in your
area.